| Subcategories |
 |
PC Components |
|
|
|
|
 |
|
|
| |
|
|
|
Antec TriCool fan unit ( TRICOOL 80MM )
Studio : Antec
by Antec
Brand : Antec
Model : TRICOOL 80MM
Publisher : Antec
Availability : Usually ships in 1-2 business days
EAN : 2000990351005
UPC : 761345750806
Avg. Customer Rating: (based on 9 reviews)
List Price : $19.99
Our Price : $3.09
|
|
| |
-
Fan Diameter: 80mm; Fan Speed: 2600 rpm; Air Flow: 34 CFM; Noise Levels: 30 dB(A)
-
Connectors: 4-pin LP4/3-pin TX3
-
Additional Information: Features:3-speed switch lets you balance quiet performance with maximum cooling3-pin and 4-pin power connectors provide convenient connections to your motherboard or power supplyFan-speed monitoring capability included (requires compatible motherboard)Speed RPM:15002000Airflow CFM:2026Noise dBA:1824
-
Application/Usage: Case; Standard Warranty: 3 Year(s)
|
|
| |
|
Product Description |
|
No matter what type of fan you're looking for, the Antec TriCool line offers reliable, stable performance. TriCool fans offer the perfect balance of silence and efficiency. TriCool fans feature a 3-speed switch so you can find the ideal equilibrium of quiet and cooling. |
| |
|
| |
|
Just what I needed. |
|
It was a little thicker than I anticipated, and I thought it wold blow a little harder, but it's an excellent deal for the price and I was very satisfied. It was just what I needed for my project. |
| |
|
Great fan for the price |
|
I bought this fan looking to cool down an overheating hard drive. I wasn't sure I could mount it in the case I had, so I didn't want to spend that much. Found this fan for a few dollars, works great! Mounted in the case with no problem, had plenty of power options, and the 3-speed switch is easy to manipulate. Highly recommend! |
| |
|
Great fan, quiet, low priced |
It's hard not to love this product. We needed a hobby fan that we were going to use to exhaust air out the back of a cabinet that we sometimes heat food up in, to avoid the moisture that fogs your glasses when you are stirring the food. I wasn't sure how I was going to figure out which pins did what, but they are very clearly identifiable based on what they give you and how it is wired.
Out of the fan case itself, pops two cables. One cable has a switch that has H M L on it, for high, medium and low. This is the speed control.
The other cable has a three pin female connector, into which a 3 wire male plug containing three wires arrive already plugged in. A red and black wire for power, and a white wire for control. The red and black wires are already built into a 4 prong Molex connector (two fo the prongs are unconnected) that has both male and female on different sides, so that you can plug the male side of the Molex into a power supply connector, and then plug another device into the female side of the Molex. The white wire is terminated by another three wire connector, with two of the positions left unconnected.
If you have a motherboard that has the three wire connector, that provides both control and power, you can pull the male plug that has the three colored wires out of the end of the cable coupled to the fan (lift the tab on the side and then slide the plug out) and pop the plug at the end of the clear wires onto your motherboard and let the motherboard do the speed control for you. Try this arrangement first: if the fan spins when you turn it on, you're fine.
If you have a motherboard that has a three wire connector, but only the control is functional, leave the wires plugged into the three wire connector, plug the second three wire connector into your motherboard, and then plug the molex into your power supply. So if you unplugged the three colored wires, plug them back in after you make the connections I described above.
If you have no three wire plug for fan speed control at all, leave that wire unplugged, and just plug the molex into your power supply.
Finally, if you don't have a fan speed control plug or it doesn't work, use the speed control switch that comes with the fan to set it on the highest setting that doesn't bug you, preferably high.
Note that the speed control reduces whatever voltage you give the fan and that drops the speed of the fan. But the fan needs 5 volts minimum to spin. If your power supply isn't putting out all 12 volts, the speed control will drop the voltage down too far at the lowest setting, causing the fan to stop spinning. But that probably means the medium setting is about as low speed as you can get with the voltage you have available.
Finally, if you are using it as a hobby fan, not with a computer, like we are, connect any 5V-12V power wart that you have lying around (clip the ends of the power wart off and jam them into the connectors with the red and black power wires (the white is the control), or clip the red and black wires off the molex plug and twist one of the wires from the fan to one of the wires of the power wart, then repeat with the other wire from each device.
The fan will spin backwards if you connect them incorrectly, so reverse the wires or the fan orientation, as needed. If I had to guess, I'd assume the side with the round Antec sticker is the side the air comes out of.
We used 4 - #6 x 1.25" screws in our hobby application, as the fan is slightly under 1" thick, and we were screwing them into 1/4 inch masonite. #8 screws probably would have worked as well. If you are using them for a computer, you'll need 1" screws that fit the holes in your computer's case.
It's a great product and a great value. It would have been nice if the manufacturer told you all this stuff, but now armed with this information, you should find that this fan works in nearly any application, computer or otherwise. We're really happy with it. |
| |
|
Great Antec fan |
I have 2 of these fans for my case. Thay keep my case very cool.
One of the fans isn't controlled by the system and is working at a 100% all the time and I don't ever notice it.
If you pay more than this for a fan, you are crazy. Its just a FAN!!! |
| |
|
Very inexpensive and quiet. |
|
Fans are quiet and the speed control is a plus. The price was right especially with free shipping. The fans feature the small 3 prong connector for your motherboard with speed sensing and a large 4 prong molex connector. The large 4 pin Molex adapter can be removed. |
| |
|
|
|
 |
 |
 |
 |
| Helping Shoppers Make Smarter Decisions, Baby Clothes, Auto Accessories, Gourmet Foods, Sporting Goods, DVDs, Movies, Computers and more |
|
|
|
|
|
|
|
|
|
|
|
| |
Black Friday Online - Discount prices, fast delivery on Computers, Printers, Hardware Black Friday Online - Antec TriCool fan unit ( TRICOOL 80MM ) only $3.09 at marketadvisory.com products. |
|
